Achieve stable cleanliness & set your champions up for unbridled success with this handy sized Introductory Pack.
New to Stablemate? Try our range of equestrian stable cleaning products to discover how effective and easy-to-use each solution is.
Each pack includes:
- 10L pail with lid
- 1 x 500mL Cleanse
- 1 tub x 30 Dis-in-fect tablets
- 1 x 500mL Equaroma™
- Jumbo Sponge
Please note that products may be smaller than they appear in photo.
The nozzle has two OFF positions, STREAM (jet) and SPRAY (mist).
Turn nozzle to required spray option for use.
After use, turn to OFF position.
Any heavy soils should be physically removed/scraped from the surface.
Apply Cleanse to the surface and allow a short dwell time.
Use a brush or cloth to help loosen soils.
Rinse with clean water.
Achieve accurate dosing by simply adding the required number of tablets to the specified volume of warm water (40⁰C) for the required application, see the tables here.
The surface should be clean and free from dirt or soiled materials before using Dis-in-fect.
Thoroughly wet the cleaned surface with the disinfection solution by the most suitable means, such as a low pressure trigger spray or a clean disposable cloth. Leave to dry naturally. Do not rinse. Equipment Surfaces which come into intimate contact with your horse, will require rinsing with clean potable water before re-use.
Check the solution strength on preparation and regularly, thereafter using AGMA test strips. Refresh when the colour chart indicates the working solution has dropped below the recommended amount of available chlorine.
Remove the horse from the stable, remove all soiled bedding, and conduct a deep clean of the environment.
Grip the trigger spray with the nozzle facing away from you and slightly turn the nozzle end clockwise to open.
Simply adjust the variable spray from jet through to mist as necessary to further treat soiling hot spots after a good deep clean and before adding fresh bedding.
Lightly spray around the space to produce a fine mist.
For a more focused jet, turn the nozzle further clockwise.
To close the spray, simply turn the nozzle anticlockwise until tight.
Cleanse Data Sheet
Dis-in-fect Data Sheet
Equaroma™ Data Sheet